NEVER WORRY ABOUT FORGETTING YOUR DRAIN PLUG AGAIN!!
Now Standard Equipment In Ranger Boats, the Bass Boat Solutions Flow-Rite Remote Drain Plug makes complying with Quagga Mussel regulations easy. With the simple turn of a knob, this cable-operated system is controlled from the driver’s console of your boat. That means no more crawling around on your hands and knees to install or remove your drain plug.
The Bass Boat Solutions Flow-Rite Remote Drain Plug also features re-designed elements. The drain plug housing now utilizes a mesh design that prevents any debris from causing problems, while glass-filled nylon makes the drain plug actuator tee handle super strong for trouble-free operation. The drain plug and housing have also been improved to provide smooth and watertight operation.
The Bass Boat Solutions Flow-Rite Remote Drain Plug is also now available in three cable lengths:
6-foot Cable - For splashwell mounted control. Ranger Boats chose this location as standard equipment.
8-foot Cable - For small to medium size boats for console mounted control.
10-foot Cable - For medium to large size boats for console mounted control.
Detailed installation instructions and mounting hardware included.
"Making your day on the water ... better." - Bass Boat Solutions
Comments: This is the best investment as far as saving the hassle of crawling under the boat and installing or removing the drain plug. As I unhook the boat, undo the transom straps, stow the transom saver, and finally hop in the boat and rotate my boats plug inward and done! Totally worth the investment of $89!! I mounted it right next to me and my gear selector.
From: Carbon Z520: USA 2/4/15
Comments: While a bit pricey, it is one of the things I did to make the ramp set-up time quicker. Another big plus is no longer having to crawl on the ground to get to the plug. I chose the 6ft option and mounted the control on the rear deck. Install was pretty easy, and I planned it for when I was pulling the oil tank and battery plate to work on livewells. If I was doing it again, I would make the same choice. It's worth it.
From: Ed: Dallas, TX 11/14/14
Comments: This is one of the best things to add to any boat. I have a 1996 nitro savage 884 and the install was a breeze. The hardest part was running the cable which took about 15 minutes. Install altogether took about 45 minutes. I purchased the 6ft model to install in my splash well area. Works as advertised!!! I will never own another bass boat without one. No more laying on the ground to put the plug in or take it out!!! Thanks Bass Boat Solutions and TW!!!
From: Greg: Sallisaw, OK
Comments: My bass boat drain plug was way underneath my boat this is great simple installation takes maybe 2 hrs and works as advertised no more having to crawl on hands and knees to drain bilge
From: Mark: Okeechobee, FL
Comments: I bought this because my original plug was hard to get to on the trailer. I have had it for the past six months and don't have any complaints. Works as advertised just put a little electrical grease on the o-ring once a month and it should last the life of the boat.
From: Don: Houma, LA
***Note: If you have questions about this product or need assistance with an order please email your questions to firstname.lastname@example.org