Phenix Bass Recon 2 Casting Rods - $179.99 to $199.99
Now delivering increased durability and strength thanks to newly updated blanks, stealth your way toward your prey with the enhanced, 2nd generation Phenix Bass Recon 2 Casting Rods. Featuring state-of-the-art Toray T-36 ton composite, carbon fiber woven blanks, combined with Phenix’s "secret sauce resin," the Phenix Bass Recon 2 Casting Rods offer exceptional performance even the most demanding tournament anglers can appreciate. Lightweight, and sensitive, yet incredibly strong, each rod is also uniformly balanced from tip to butt, and dialed in with the dynamic actions you need for range of bass fishing applications. Premium Silicone Carbide Guides also offer excellent durability and reduced friction, while premium Fuji blank-thru reel seats and durable EVA grips help further reduce weight. Stronger and stealthier than ever, the Phenix Bass Recon 2 Casting Rods are the next generation of tournament bass fishing rods.
Backed by Phenix's Limited Lifetime Warranty
Comments: I have a 7'1" Med/hvy Recon 2 casting rod. I have fished this rod for about 5 months. Using it mainly for jigging and casting lipless crankbaits. The rod has performed well. It is very light while still possessing plenty of backbone. The tip is soft for a fast action rod but it aids in casting so 6 to one half a dozen to another on preference. I did have an eye work lose of the wrap and epoxy the first day of use. I was not to happy but with a little super glue and epoxy it was fixed. I would buy this rod again but will probably give the M1 series a try next or Powell.
From: Eric: Houston, TX 3/6/14
Comments: The Phenix Recon and Recon2 are decent rods until they decide the malfunction and snap 5 guides down the blank. i have had this issue with both recon rods and will never buy them again, you shouldnt buy this rod either, stick with the m1 series. way more solid construction.
From: Steven: Dana Point, CA
Comments: These are great looking rods; however, don't fooled. This series has major quality control issues. I ordered three rods and, when I received them, I found the following: The C715 is supposed to be rated at 3/8 - 1 1/2. When I receive the blank is stated 3/8 - 1/2oz. Also, after fishing the rod out for a couple of outings, the lock down nut ring completely fell off. This also happened to the C713 which was ordered at the same time. The third rod, which was a C766, had the second guide off center by a 1/8 of an inch. This is not good since they're a lot of rods in this price range that have better quality control.
From: Cal: NJ
Comments: Pros: rods are extremely light. Ultra sensitive and have an awesome design to them
Cons: Almost too thin if you have big hands. Eyes tend to separate from glue. Whatever glue they use on all of their rods, its horrible. Every phenix rod I have had the winding checks all immediately came off after a couple uses or even right out of the packaging.
And hopefully they fixed what was wrong in the recon 1 blanks. I sold all my Phenix rods and went with Okuma based mainly on customer service. When you spend 200+ dollars on a rod, you should be taken care of if it breaks from normal use. Im not going to pay 110+ dollars just to replace it.
Comments: I picked up a couple of the gen2 Recon 764s about a month ago and have been very impressed. The build quality is excellent, SIC guides are great, especially for a rod in this price range. The sensitivity, and balance are both very good. I love the parabolic action of these rods, and the new hook keeper placement is much improved over the gen1s. Phenix does a great job with customer service as well, these rods are hard to beat for the money.
From: Cody: KY
Comments: Just picked up the 714 and 715, and i am very impressed with the craftsmanship of these rods. Very light, very comfortable and balance well with the reels i have attached. Quantum tour on the 714, and quantum smoke 150 on the 715. The tips on both are a little softer than i had expected, so i'm not sure if i'll be able to use them for what i had intended, but we'll see when they hit the water.
From: Dan: WV
Comments: I bought the C715 Heavy during the Spring sale. Fished it this whole summer with a Core 51Mg7 and Scorpion 1001XT. This rod is incredibly light - 3.67 oz for a Heavy action rod! But... it's not as balanced as I would like, especially with the Core on it. It feels a little better with the slightly heavier Scorpion. Some things that I don't like about this rod is the placement of the hook keeper(on the blank by the handle butt), and the short trigger - it seems like I don't have as firm of a grip on the rod as I would like. Other than that, this rod has been good and has landed me some quality 3 and 4 pounders. For the money, it contends nicely vs. Crucials, Savvys, Avids and even the current GL2. But it's not up to Cumara or Dobyns Champion level, mainly due to not being as nicely balanced. Feels like a lighter, slightly less sensitive version of a Zillion, with a softer tip.
From: Pete: MN
Comments: Those rods are awesome! Very light, ultra sensitive and the carbon look just amazingly great! Paired up with an MGX and you got one super hot combo!
Comments: Had this rod for a few weeks now. Got the 7'1" and paired it up with a steez bait caster and i have to say it is a very very nice rod, it is light and casts great. Overall this rod just has a great feel to it. I really don't see myself having a single problem with this rod
From: Ross: MA
Comments: :just received my recon 714 mh. so far the rod is sick, attention to detail is awesome. useing it as swim jig rod let you know how it fishes soon.
From: John: Long Island, NY
Comments: OK Guys... Here is the reality.. I guarantee that most of the breakage issues that some are talking about are 100% operator error!!The others prob rod/line choice. (throwing 80lb braid on a light weight rod) I know MANY guys that have these rods and have not had one issue with any aspect of these rods. I did have a tip break, but it was because of me, not the rod. When I called Phenix, they shipped out a replacement the same day, on them. Maybe you called them with an attitude. Remember, you get more bees with honey than you do with vinegar. Nobody wants to deal with a jerk and they don't have to.
From: Dennis: VA
Comments: So, at what point does a company stop selling a rod that is showing signs of major craftsmanship defects?? Thanks for the reviews, I would never Purchase this product...looks great, performs poorly.
From: Todd: Valley Forage, PA
Comments: this rod looks great but dont be fooled! The first weekend the end cap on the butt section fell off. Then while trying to land a six pounder the blank exploded into three different pieces. Its under warranty but I wouldn't waste another dime sending it in. Couldn't be more dissatisfied with a rod.
From: Mark: MT
Comments: Bought the 744MH and 715H. Both are solid. Attention to detail could be better on some of the rods. My buddy bought one and had flex coat covering the eye. For the price its worth it. Would not pay more.
From: Jon: So Cal
Comments: I can't find anything on this rod that could be considered a cosmetic flaw. A real work of art. The tip has a bit more action than I'm used to for a fast action taper, but is not whippy by any measure. The grip is a bit thinner than I'm used to, but grows on me the more I handle it. Overall a fantastic value at this price point. They could really get away with charging more.
From: Ian: MN
Comments: Initially I really liked the look and feel of the two recons I had, then I fished them for the first time during spring break, snapped one within the first hour and the metal ring on the winding check came off and ratles non stop, I'm very dissapointed
From: Max: WI
Comments: Unbelievable rods for the cost. I got the 7'6"mh. took it to falcon for a week. Ive used Gloomis all my life. I have to say the phenix is lighter, and more sesitive. I used it as a carolina rig rod / light pitchin rod. after a week its no longer a virgin, I caught 95% of my fish on this rod. countless 6-8 lbs. it even held up to a 10 and a 12.25. I was able to horse them away from cover and get them to the boat. Gona get more for sure.
From: Jason: Tempe, AZ
Comments: I got mine out for the first time today...I like the way it casts and feels. I have not boated any fish on it so I cannot speak to the rod breaking or not. What I can ask is how does it make any bit of sense to put the hook holder near the second grip. Every time I toss the lure out, the stupid hook holder pokes me in the hand. I am planning on cutting mine off and grinding it smooth. They need to really rethink that placement.
Comments: I have just now broke my second 7'6" recon on the hookset. Phenix took forever to get me a replacement on the first one and wanted me to pay a replacement fee. This was on the first day of using the Rod. I see that others have had the same problem I would suggest this rod to anyone. Phenix customer support is also poor in my opinion. I am sure its going to be a battle to get this second one replaced.
From: Jay: La Plata
Comments: By far the best rod for the money right now. Absolutely perfect. $300 rod for half the price. Easily will buy more.
From: Daniel: NC
Comments: top notch quality for a reasonable price. I was a lifetime loomis guy, but these recon rods are undeniable. I got the 796 and this thing will yank the jaws off of moby dick!!!!!
From: Dustin: Sugar Land, TX
Comments: Just received my first order (def. not my last!) of Phenix Rods and I can't say anything but WOW!! I got the Recon 714 and the 744 as well as the 7'9" Glass Cranking Stick. I'm using the 714 for Square Bills and the 744 for Spinnerbaits, Buzzbaits and Topwater. They cast like no other rods I've ever felt other than Daiwa Steez rods and my Zombie 7'4". But those rods are $300-$400. My Phenix rods feel the same and are built with the same care for half the price!! UNREAL!!
From: Paul: Haymarket, VA
Comments: Just received my 744 today! WOW! Extremely light and well put together. Looks and feels like a $300 rod. I will be buying another one! Hats off to T.W. for there outstanding service!
From: jlbuckeye: Columbus, Ohio
Comments: Bought a 713, 744, and 715 after getting a 723 spinning on black friday. Never been more impressed with a rod!
From: Robby: Sacramento, CA
Comments: Got the 723M on Black Friday from TW, WOW!!! Been using it ever since for drop shotting, flick shakes, and shakey heads. Awesome rod. Best value for the under $200 rod market. Compares favorably to more expensive offerings. Sensitive, Balanced and LIGHT!
From: Robby: Sacramento, CA
Comments: Not sure if I got a bad rod or what but first hookset and rod tip snapped 12" from tip. Was not a violent hookset by any means. Had to be a defect to happen that fast. Up to that point I was in love with the quality look and feel of the rod. Very light! Not sure what to think now
Comments: C715 - Wow. Light weight and seems to be a very high quality build. Nice details and very attractive overall. It has more flex in the tip than I expected. I think it will be a great all around casting rod. Great value and pairs well with my Lews TP.
From: BP: Ohio
Comments: I have the 715h...only problem i have with it is the hook holder is below the reel seat as aposed to above
From: Sam: Los Angeles, CA
Comments: Everyone wants the most for their money. The Recon delivers that! $300 quality for less than $200...might be the best looking/feeling rod Ive ever held...period! Trading all my rods for Recons !!!!
From: Larry: Mount Airy, NC
Comments: Killer rods, very sensitive and looks like a JDM rod for a great price! Don't hesitate buy one!
Rod Handle Length:
Tackle Warehouse measures its rod handle lengths from the butt of the rod to the top of the foregrip. [ Diagram ]
Place Your Order
More Phenix Casting Rods
Now available in a classic cherry red, the red Phenix Glass Crankbait Casting Rods feature lightweight, 100% glass blanks with the moderate, parabolic actions you need for fishing crankbaits.
Featuring high strength Toray carbon blanks and premium components, the Phenix Diamond Inshore Series Casting Rods have what it takes for fishing big swimbaits and even saltwater applications.
Don't be outgunned - the Phenix M1 Swimbait Casting Rods deliver advanced uncompromising performance and technology with all the technique specific attributes you need for fishing swimbaits, including extended handles and serious backbones.
The next generation of your fishing arsenal is here - the Phenix M1 Casting Rods are loaded with advanced engineering and premium features to deliver strength and ultra-sensitivity like no other rod series in their class.
Lightweight, and sensitive, yet incredibly strong, each rod is also uniformly balanced from tip to butt, and dialed in with the dynamic actions you need for range of bass fishing applications. Stealth your way toward your prey with the Phenix Bass Recon Casting Rods.
Offering the attributes and features that discerning crankbait anglers will appreciate, the Phenix Glass Crankbait Casting Rods feature 100% glass blanks that still remain incredibly lightweight, as well as, premium Fuji components.
The Phenix Ultra Swimbait Classic Casting Rods are completely redesigned to provide anglers with a perfectly balanced and beautifully crafted rod series specifically for fishing swimbaits.
Beautifully crafted, the Phenix Ultra MBX Classic Casting Rods deliver the popular performance of the original Ultra MBX Series, but also include a redesigned handle system, which uses dense, exotic Burl Wood to flawlessly balance out each rod without the use of metal or screws.
Featuring an innovative telescopic design, the Phenix Super Classic Flipping Rods offer one-piece performance - and are also perfectly balance without the use of metal or screws.
Phenix Rod Co.'s steep bass fishing tradition is reflected in their Ultra MBX series. The Ultra MBX blanks are constructed of high modulus graphite and carbon fiber weaved together resulting in a strong and lightweight blank.
The X10 model from the Phenix Crankbait Casting Rod Series was a recent recipient of the Tackle Tour Editor's Choice Award for a crankbait rod. Representative of the entire series, these rods deliver a quality mix of premium performance and a great price.