Overview
Updated and better than ever, the Ninja Grass Blade 2.0 is built with a wider cutting edge than the original Ninja Grass Blade to improve cutting performance and help unwanted grass from getting caught on your trolling motor. A must-have for any angler who has ever spent valuable fishing time removing grass from a trolling motor, the Ninja Grass Blade 2.0 is made from machined, chemically sharpened aluminum with an extra large cutting blade, which slices through vegetation as it gets sucked through the prop to keep your trolling motor running at peak performance.
Incredibly easy-to-install, the Ninja Grass Blade 2.0 attaches to the lower unit of your trolling motor and comes with all of the necessary mounting utensils and easy-to-follow instructions that will have you fishing weedlessly in no time. Stop avoiding the grass and get to where the big fish live with the Ninja Grass Blade 2.0.
Dimensions: 2” x 1-7/8”
-Includes double-sided tape
Previous Feedback
Comments: The double-sided tape can dry out over a period of time and the blade will probably fall off. Try using JB Weld MarineWeld or JB Weld WaterWeld as a solution. Using one of these products will solve this issue however the blade will be permanently fixed to the trolling motor.
From: Byron R: Lake Stevens, WA 6/20/23
Comments: Added the 2.0 to the opposite side of my Ultrex and with the combination I can fish with less distraction when in heavy weeds.I have used the tape and with proper prep on the housing I have had 0 problems.
From: Richard: FOND DU LAC, WI 11/11/20
Comments:I have had two of these. They really work until they fall off. I was able to save the second one and will try to epoxy it back on.
From: Charles: Florida 7/22/20
Comments:I've had one for 5 years now and can attest that it works great. Definitely makes a difference if you fish in and around aquatic vegetation. Mine has performed incredibly well clearing my tm prop of primerose, hyacinth and elodea on the CA Delta. **Don't use the two-sided tape that comes with it though, it will fail. I researched it and used Devcon waterproof "2-ton" clear epoxy and it has stayed solid.
From: Unknown: 3/29/20
Comments:Works better than expected. Aimed the boat at the nastiest weeds I could find and it just ground through them... with a 12v TM.
From: Unknown: 9/3/19