SCP 1726 Wiring Harness with Switch and Jumper
Overview
If your batteries are in the back of your boat, the SCP 1726 Wiring Harness with Switch and Jumper is the marine electronics power harness you want to avoid blinking units, poor image quality, and bad power connections. Designed specifically for walleye boats, the SCP 1726 is perfect for boats that have the batteries in the back starboard side of the boat and the console further towards the bow than the standard bass boat. Featuring a 17-foot run to the console and a 26-foot run to the bow, the 1726 harness can be cut back to custom-fit any boat for added adaptability.
The SCP 1726 Wiring Harness also works perfectly with Tracker aluminum boats that don't have a rigging tube and require the harness to go down the side panel of the boat and into the transom with the steering cables. The first wiring harness ever made for the sole purpose of wiring up your marine electronics, you’ll “sea” the difference the SCP 1726 Wiring Harness with Switch and Jumper makes on your vessel.
Includes: 26-ft Universal Harness, Battery Disconnect Switch, and 20-in Jumper Wire
*Compatible with all brands and accessories including Humminbird, Garmin, and Lowrance
*Be sure to purchase an inline fuse holder with your harness for each unit, 360, and a structure scan box for Lowrance and/or Humminbird.
*Typically you will need one (1) fuse holder for every electronic device you add to the circuit
*Best for any boat that has a rigging tube on the starboard side, has the battery located on the back starboard side of the boat, and is less than 26 ft in length.
